气体灭火系统是警器、手自动转换开关等产品，集火灾报警、气体灭火功能于一体，满足相关型号的要求，控制器内置气体灭火区控模块，可分别控制各区气体灭火设备，显示工作状态，工作可靠，性能稳定，使用方便，可广泛用于各类气体灭火工程。

The gas fire extinguishing system is an alarm, manual and automatic change-over switch and other products, which integrates the functions of fire alarm and gas fire extinguishing, and meets the requirements of relevant models. The controller has a built-in gas fire extinguishing area control module, which can control the gas fire extinguishing equipment in each area respectively, display the working status, work reliably, have stable performance, and are easy to use. It can be widely used in various gas fire extinguishing projects.

川消气体灭火系统应选用灵敏度级别高的火灾探测器，做到早报警，早灭火。保护区域应选择两种不同类型的火灾探测器，通常为感烟火灾探测器和感温火灾探测器。其他类型的火灾探测器或手动报警按钮也可用于特殊场所。各种探测器的保护面积应按规范要求交叉计算布置。

The gas fire extinguishing system shall select fire detectors with high sensitivity to achieve early alarm and early fire extinguishing. Two different types of fire detectors shall be selected for the protection area, usually smoke fire detector and temperature fire detector. Other types of fire detectors or manual alarm buttons can also be used in special places. The protection area of various detectors shall be cross calculated and arranged according to the specification requirements.

对于其他类型仅输出开关值信号的火灾探测器，可通过继电器模块连接到报警电路。采用哪种火灾探测器组合来提供“两个”独立的火灾信号，必须根据保护区域和被保护对象的具体情况来选择。

For other types of fire detectors that only output switch value signals, they can be connected to the alarm circuit through the relay module. Which combination of fire detectors is used to provide "two" independent fire signals must be selected according to the specific conditions of the protected area and the protected object.

例如，对于通信机房、计算机机房，一般采用温度控制系统，将室温保持在一定的范围内；当发生火灾时，保护区域的温度不会在开始时迅速上升，烟雾探测器会迅速感知到。

For example, for the communication room and computer room, the temperature control system is generally used to keep the room temperature within a certain range; In case of fire, the temperature in the protection area will not rise rapidly at the beginning, and the smoke detector will quickly sense it.

在此类保护区域火灾探测器的选择和线路设计中，除考虑两个独立的温烟信号的组合外，还可以考虑两个独立的烟信号的组合来提前灭火控制的启动时间。

In the selection and circuit design of fire detectors in such protection areas, in addition to the combination of two independent warm smoke signals, the combination of two independent smoke signals can also be considered to advance the start time of fire control.

当然您在使用该系统的使用应当提前了解或者学习使用说明，这样才能更好的进行工作，而且还能保障好周围的，您可以关注我们网站www.cx-fire.com了解更多信息！

Of course, you should know or learn the instructions before using the system, so that you can work better and ensure the safety around you. You can follow our website www.cx-fire Com learn more!