消防水炮已广泛应用于大型空间场所，如车间、工厂、仓库、物流中心、车站、机场、体育馆等。那么消防水炮的自动跟踪、定位和喷洒在通过验收之前，能满足哪些要求呢？

Fire water monitors have been widely used in large space places, such as workshops, factories, warehouses, logistics centers, stations, airports, gymnasiums, etc. What requirements can the automatic tracking, positioning and spraying of fire water monitor meet before passing the acceptance?

消防水炮系统的型号、数量、压力等参数符合图纸标准要求。验收人员验收的依据之一是图纸，因为图纸经设计院设计后需经有关部门审查，审查合格后方可施工。

The model, quantity, pressure and other parameters of the fire water monitor system shall comply with the drawing standard requirements. One of the basis for acceptance by the acceptance personnel is the drawings, because the drawings shall be reviewed by relevant departments after being designed by the Design Institute, and the construction can be carried out only after passing the review.

验收依据之一是完全按照图纸进行施工，针对消防水炮系统的型号、数量和设计位置，以及消防水炮制造商的资质和消防水炮消防产品的识别标志。

One of the bases for acceptance is to carry out construction in full accordance with the drawings, with regard to the model, quantity and design position of the fire water monitor system, as well as the qualifications of the fire water monitor manufacturer and the identification marks of the fire water monitor fire products.

当检验压力满足标准要求时，需要模拟末端试水装置或末端试水装置。压力表安装在试水装置的出口处。可通过压力表检查末端管道的压力，以确定水炮的压力达到额定值。

When the inspection pressure meets the standard requirements, it is necessary to simulate the end water test device or the end water test device. The pressure gauge is installed at the outlet of the water test device. The pressure of the end pipe can be checked by the pressure gauge to ensure that the pressure of the water cannon reaches the rated value.

消防水炮的重要功能是喷水灭火，这也是一个非常重要的环节。自动跟踪定位喷水灭火不符合要求的，不予验收。如果想让智能消防水炮准确定位并灭火，消防水炮管道中的水压和流量满足智能消防水炮的要求，然后在保护半径内点燃试验火。

The important function of the fire water monitor is to spray water for fire extinguishing, which is also a very important link. If the automatic tracking and positioning sprinkler fails to meet the requirements, it shall not be accepted. If you want the intelligent fire water monitor to accurately locate and extinguish the fire, the water pressure and flow in the fire water monitor pipeline meet the requirements of the intelligent fire water monitor, and then ignite the test fire within the protection radius.

在自动状态下，水炮应能自动定位火焰，自动打开阀门喷水，准确击中火焰并熄灭火焰，水炮自动报警，并能自动联动水泵等设备。所有这些都是正常的，这意味着该消防水炮的性能良好。

In the automatic state, the water monitor shall be able to automatically locate the flame, automatically open the valve to spray water, accurately hit the flame and extinguish the flame, the water monitor shall automatically give an alarm, and can automatically link the water pump and other equipment. All these are normal, which means that the fire water monitor has good performance.

川消提醒，在实际应用过程中，很多时候是不能燃烧汽油的，如何测试？在调试过程中，我们经常遇到小车点火和油漆桶点火的使用，这些非标准点火能否测试智能消防水炮的灭火性能？这些点火条件不能准确反映智能消防水炮的性能，但也可以测试消防水炮是否能自动检测和定位火焰。

Chuanxiao reminded that in the process of practical application, gasoline cannot be burned many times. How to test? During commissioning, we often encounter the use of trolley ignition and paint bucket ignition. Can these non-standard ignition test the fire extinguishing performance of intelligent fire water monitors? These ignition conditions can not accurately reflect the performance of the intelligent fire water monitor, but can also test whether the fire water monitor can automatically detect and locate the flame.

根据当地验收规范、自动喷水灭火系统和消防给水系统进行验收。因此，消防水炮能满足设计要求，准确喷水灭火。您有需求要选购的话就来我们网站www.cx-fire.com关注吧！

The acceptance shall be conducted according to the local acceptance specifications, automatic sprinkler system and fire water supply system. Therefore, the fire water monitor can meet the design requirements and spray water accurately to extinguish the fire. If you need to purchase, please come to our website www.cx-fire Com follow!