川消_萃联
气体灭火系统
自动喷水灭火系统

联系我们

  • 萃联(山东)消防设备有限责任公司
  • 电话:15508683119
  • 地址:山东省济南市历城区祝舜路44号
当前位置:首页 > 新闻中心七氟丙烷灭火设备使用中应该注意哪些事项

七氟丙烷灭火设备使用中应该注意哪些事项

来源:http://www.cx-fire.com/ 日期:2024-04-09

七氟丙烷因其具有无色、无味、灭火效率高,而且无污染不导电的优良性能,所以大量投入到灭火系统的使用中。所以七氟丙烷灭火系统具有设计、性能可靠,操作简单,良好等特点,在大型建筑消防灭火当中被大量采用,下面,就七氟丙烷灭火系统的使用进行介绍。

Heptafluoropropane is widely used in fire extinguishing systems due to its excellent properties of colorless, odorless, high fire extinguishing efficiency, and pollution-free and non-conductive properties. Therefore, heptafluoropropane fire extinguishing system has the characteristics of advanced design, reliable performance, simple operation, good environmental protection, etc., and is widely used in large-scale building fire extinguishing. Here, the use of heptafluoropropane fire extinguishing system is introduced.

20230310105629391.png

七氟丙烷灭火设备

Heptafluoropropane fire extinguishing equipment

1、本品适用环境温度为:0℃~50℃,相对湿度≤95%(40℃±2℃)。

1. This product is suitable for environmental temperatures ranging from 0 ℃ to 50 ℃, with a relative humidity of ≤ 95% (40 ℃ ± 2 ℃).

2、保护区域的空气中不得含有易爆、导电尘埃及腐蚀部件的有害物质,否则必须予以保护,系统不得受到震动和撞击。

2. The air in the protected area must not contain explosive, conductive dust, or harmful substances that corrode components, otherwise it must be protected, and the system must not be subjected to vibration and impact.

3、瓶组架必须安装牢固。

3. The bottle assembly frame must be securely installed.

4、操作人员须经过培训合格后方可操作,严禁其他人员触摸。

4. Operators must be trained and qualified before operation, and other personnel are strictly prohibited from touching.

5、灭火系统喷射灭火剂前,所有人员必须在延时期内撤离火情现场,灭火完毕后,必须启动风机,将废气排出后,工作人员方可进入现场。

5. Before spraying the fire extinguishing agent into the fire extinguishing system, all personnel must evacuate the fire scene within the extended period. After extinguishing the fire, the fan must be started first to discharge the exhaust gas before the staff can enter the scene.

6、启动瓶、储瓶在运输过程中,应轻装轻卸,防止碰撞、卧置、倒置,启动瓶、储瓶应避免接近热源。

6. During transportation, starting bottles and storage bottles should be loaded and unloaded with care to prevent collision, lying down, or inversion. Starting bottles and storage bottles should be kept away from heat sources.

7、更换新的膜片时必须使用由我公司提供指定的供应商的产品,不得随意用未经试验的膜片代用。

7. When replacing a new diaphragm, it is necessary to use products from the designated supplier provided by our company, and untested diaphragms must not be used as substitutes.

8、在日常维护、保养或进行周期检查时应严格按照操作程序,确保防止灭火剂的误喷。

8. Strictly follow the operating procedures during daily maintenance, upkeep, or periodic inspections to prevent accidental spraying of fire extinguishing agents.

9、拆装过程中应避免碰伤表面而影响外观。

9. During the disassembly process, avoid damaging the surface and affecting the appearance.

10、无关人员切勿乱摸乱动本系统的零部件,以免发生意外。

10. Unrelated personnel should not touch or tamper with the components of this system to avoid accidents.

11、杜没有经过消防培训的人员对本设备进行维护保养。

11. Du absolutely did not have personnel trained in firefighting to maintain this equipment.

本文来自:川消更多的内容请点击:http://www.cx-fire.com我们将会为您提问的问题提供一个满意的服务,欢迎您的来电!

This article comes from: Chuanxiao. For more content, please click: http://www.cx-fire.com We will provide satisfactory service for the questions you ask. Welcome to call us!

上一篇:烟感报警器的工作原理有哪些?
下一篇:水流指示器的作用及安装位置是什么?

相关产品 / Related products