消防泵在消防事业中起着关重要的作用，关乎人命，所有消防泵的检测是非常的严格的，在使用的时候，我们必须保持清醒的头脑，当消防泵在使用中出现故障的时候，我们需要冷静的考虑问题，下面川消小编简单的给出几点建议：

Fire pumps play a crucial role in the firefighting industry, which is related to human life. The testing of all fire pumps is very strict. When using them, we must maintain a clear mind. When a fire pump malfunctions during use, we need to calmly consider the problem. Below, Sichuan Xiaobian provides a few simple suggestions:

一、消防水泵都是有备用泵的，正当主泵发生故障的会自动切换到备用泵的。

1、 Fire pumps all have backup pumps, and if the main pump fails, it will automatically switch to the backup pump.

一般是漏水或者无法启动。漏水可能是机械密封或者盘根出现问题。无法启动可能是控制柜控制线路出现问题。法规要求消防泵都是要一用一备。作为消防系统的动力心脏，建议尽快找维修人员确定原因进行修复。

Generally, it is due to water leakage or inability to start. The leakage may be due to a problem with the mechanical seal or packing. Unable to start may be due to a problem with the control circuit of the control cabinet. The regulations require fire pumps to be one in use and one standby. As the power heart of the fire protection system, it is recommended to seek professional maintenance personnel as soon as possible to determine the cause and repair it.

二、对消防泵在使用过程中发现在叶轮安装太小。

2、 During the use of the fire pump, it was found that the impeller was installed too small.

在进行检查消防泵如果发现叶轮直径太小，然后说这个机器上的叶轮不匹配，不在工作中产生良好的工作效率，所以一定要接触到的消防泵厂家，然后可以更换叶轮，安装在消防泵顶部的右叶轮。

If the diameter of the impeller is found to be too small during the inspection of the fire pump, and it is said that the impeller on this machine does not match and does not produce good work efficiency, it is necessary to contact the fire pump manufacturer before replacing the impeller and installing it on the right impeller at the top of the fire pump.

三、对消防泵在自动关机后发现一段时间的使用过程中

3、 During the use of the fire pump after automatic shutdown for a period of time

当这种现象出现在使用消防泵的过程中，你可能是叶轮堵塞，所以看到里面的叶轮是不是杂质的叶轮堵塞。

When this phenomenon occurs during the use of a fire pump, you may see that the impeller inside is blocked by impurities.

四、在消防泵在发现压力表的位置，使用过程中不正确的

4、 The position of the pressure gauge was found to be incorrect during the use of the fire pump

当在使用时发现压力表的位置是不正确的，那么我们要看一下自己的判断是不是正确的，当压力表确实是不寻常的话，那么他们就要检查出口管道了。

When the position of the pressure gauge is found to be incorrect during use, we first need to check if our judgment is correct. If the pressure gauge is indeed unusual, they need to check the outlet pipeline.

另外重要的一点，就是及时联系川消消防泵厂家售后，这是的处理方法。更多相关事项就来我们网站http://www.cx-fire.com咨询!

Another important point is to promptly contact the after-sales service of the Sichuan Fire Pump manufacturer, which is a professional handling method. For more related matters, come to our website http://www.cx-fire.com consulting service