我们都知道消防设备是否合格，对人们的有着非常大的影响，如果发生火灾等情况，而消防泵却无法正常使用，那么危险性就会明显增加，甚会危害到人们的生命财产了，因此近些年消防、等行业对该设备的故障问题重视，日常检查的效率也明显提高了，下面川消小编来说说消防泵主要故障问题有哪些。

We all know whether fire-fighting equipment is qualified or not, which has a great impact on people's safety. If there is a fire and the fire pump cannot be used normally, the danger will increase significantly, and even endanger people's life and property safety. Therefore, in recent years, the fire protection, environmental protection and other industries attach great importance to the failure of the equipment, and the efficiency of daily inspection has also improved significantly, Now let's talk about the main fault problems of fire pump.

1、液体提供要达标

1. Liquid supply must meet the standards

为什么会出现消防泵无法排出液体的情况呢?虽然该设备的结构比较简单，但是出现故障的几率还是比较高的，其中液压不足的情况就很常见，这会导致设备无液体提供，如果不能及时发现故障问题，就会引发非常严重的问题了，检查的时候务必要注意到这一点。

Why does the fire pump fail to discharge liquid? Although the structure of the equipment is relatively simple, the probability of failure is still relatively high. Insufficient hydraulic pressure is a common situation, which can lead to no liquid supply to the equipment. If the fault problem cannot be detected in a timely manner, it can cause very serious problems. It is necessary to pay attention to this when inspecting.

2、注意管线是否堵塞

2. Pay attention to whether the pipeline is blocked

除了之前提到的液体提供不足故障问题之外，管线堵塞的几率也相当高，尤其是液体比较浑浊的情况下，会导致管线不断堆积污垢，因此堵塞的情况就会频繁的发生了，这也会影响消防泵的液体输送效率，只要清理障碍物，就能让设备恢复正常运行状态。

In addition to the aforementioned problem of insufficient liquid supply, the probability of pipeline blockage is also quite high, especially when the liquid is relatively turbid, which will lead to continuous accumulation of dirt in the pipeline, so the blockage will occur frequently, which will also affect the liquid delivery efficiency of the fire pump. As long as the obstacles are cleared, the equipment can return to normal operation.

此外消防泵的流量不够怎么了？

Besides, the flow of fire pump is not enough. Why?

1.密封环严重磨损或腐蚀?换新密封环。

1. Is the sealing ring severely worn or corroded? Replace the sealing ring with a new one.

2.半开式叶轮与消防泵盖间隙太大?减小间隙。

2. Is the clearance between the semi open impeller and the fire pump cover too large? Reduce the gap.

3.吸入管路太细或杂物堵塞?换合适管路，杂物。

3. Is the suction pipeline too thin or blocked by debris? Replace the appropriate pipeline and remove debris.

4.叶轮严重磨损或严重腐蚀?换新叶轮。

4. Is the impeller severely worn or corroded? Replace the impeller with a new one.

5.吸入管浸泡的深度不够，有空气吸入消防泵内?增加吸入管的浸入深度。重装消防泵用静环。

5. The immersion depth of the suction pipe is not enough, and air is sucked into the fire pump? Increase the immersion depth of the suction pipe. Reassemble the stationary ring for fire pump.

以上就把消防泵的故障问题简单的介绍给大家了，大致的看完介绍内容之后，我们可以知道更多的产品相关情况了，日常维护设备也会注意到更多的细节问题，其实维护频率不用太高，只要定期维护就可以了。还有什么问题就来我们网站http://www.cx-fire.com关注留言！

Above is a brief introduction of the fire pump failure. After reading the introduction, we can know more about the product, and daily maintenance equipment will also pay attention to more details. In fact, the maintenance frequency should not be too high, as long as regular maintenance. If you have any further questions, please come to our website http://www.cx-fire.com Follow the message!